loading

Guzhan | Custom Silicone Solutions – For Your Brand

What is masking products for powder coating?

Powder coating requires high-temperature-resistant masking products that can withstand oven bake cycles (typically around 400°F / 204°C) without melting, shrinking, or leaving adhesive residue

1. Plugs (For Holes and Bores)

What is masking products for powder coating? 1
Silicone Tapered Plugs: The most popular and versatile choice for general holes; they compress easily to fit a range of inner diameters. 
Silicone Tapered Plugs with Handles/Pulls: Feature an extension or pull-tab to make insertion and removal faster in deep or hard-to-reach holes. 
First Thread Masking Plugs: Designed to protect top and internal threads in blind holes, eliminating the need to tap or chase threads after baking. 
Flangeless Plugs with Ribs: Provide extra grip and a tighter seal in threaded or deeply-seated holes. 
Taper flange plugs: Hollow with a wide flange at the top to mask a concentric grounding or flat area around the hole. 
Material note: Silicone handles temperatures up to 600°F (316°C) and is reusable, whereas EPDM is more economical but rated for lower heat (around 300°F–375°F). Options are available via suppliers like Custom Fabricating & Supplies and Viadon. 


2. Caps (For Bolts, Studs, and Tube Ends)

What is masking products for powder coating? 2
Silicone Caps: Used to slip over external threads, studs, pems, and pipe or tube ends. 
Easy-Pull / Finger-Tab Caps: Feature an ergonomic tab for quick stripping. 
Tip: For a secure fit, choose a cap with an inner diameter roughly 10% smaller than the outer diameter of the part. Explore options via Caplugs. 


3. Tapes and Discs (For Flat Surfaces, Seams, and Edges)

What is masking products for powder coating? 3
Green Polyester Masking Tape : Coated with high-temp silicone adhesive; resists temperatures up to 400°F (204°C) and removes cleanly in one piece without shredding or adhesive transfer.
Polyester Masking Discs (High-Temp Dots): Pre-cut circular dots used to mask off small flat areas, threaded holes, or bolt circles.
Removal Tip: High-temperature tapes are best peeled off promptly after the bake cycle while the part is still warm (or around the "wet speckle" gel stage at 180°F–200°F) to get a razor-sharp paint line. 

Are you looking to mask threaded holes, exterior studs, or flat panels, and do you need help picking sizes or a starter assortment kit?

prev
Why Masking Tape and Silicone Caps Must Work Together in Powder Coating
recommended for you
Get in touch with us
Guzhan specializes in high-temp silicone masking Products for powder coating, anodizing, e-coating, and spray painting industries. we deliver precision-engineered silicone plugs and caps that protect threads, holes, and surfaces from overspray — eliminating rework and reducing waste.
Copyright © 2026  Xiamen Guzhan Industry Trade Co.,Ltd - xmguzhan.com |
Contact us
wechat
phone
email
whatsapp
Contact customer service
Contact us
wechat
phone
email
whatsapp
cancel
Customer service